Concrete Slabs
in Gisborne

A stable slab is what everything above it depends on. We excavate, level, box, reinforce and pour concrete slabs across Gisborne and Tairāwhiti — shed pads, garage and utility slabs, yard slabs and foundation work for new structures. Getting the ground right is most of the job, and because our own digger does the digout the levels are ours to answer for. Ask for a slab quote.

Excavator and timber formwork set out for a concrete pour on a Gisborne site
Real Eastcrete job · site prep and boxing
/// What makes a slab last
01

The base decides everything

Compacted hardfill, correct levels and clean falls do more for a slab than any amount of concrete. We take the time on the ground before anything is poured.

02

Reinforced for the load

Mesh or bar, thickness and joint layout are matched to what the slab is carrying — a shed floor, a garage, a farm structure or a yard that takes machinery.

03

One crew, digout to pour

Excavation, cart-away, boxing and the pour are all ours. No handover gap between contractors, and no argument about whose stage caused a problem.

04

Poured flat, finished clean

Screeded to level, floated and finished to suit what goes on top — a sealed floor, a building platform or an exposed working surface.

Slabs we pour

Slab-specific photography is being added as jobs are completed

Shed & garage pads

Sized and reinforced for the building going on top, with clean edges to build off.

House & extension slabs

Foundation slabs and additions, formed and poured to the levels your build requires.

Yard & machinery slabs

Thicker sections and heavier reinforcing for rural yards, wash-down bays and equipment areas.

Utility & tank pads

Small pads for tanks, pumps, bins and outdoor structures — the jobs bigger outfits will not take.

Re-pours & replacements

Breaking out failed or cracked slabs, carting away the old material and starting again properly.

Rural foundation work

Access, ground conditions and cartage handled with our own digger and tipper.

/// Our process

How a slab job runs

Every slab is set out from the levels on your site, not from an assumption. We confirm what the slab carries before we quote thickness and reinforcing.

01
EnquiryTell us what the slab is for, roughly how big, and where.
02
Site visit & quoteWe check access, ground and levels, then quote in writing.
03
Excavation & baseDigout, cart-away, hardfill and compaction to the depth the slab needs.
04
Box & reinforceBoxing set to level, mesh or bar placed and chaired, joints planned.
05
Pour & finishPoured, screeded, floated and cut — then cured before anything goes on it.
/// Slab FAQs

Straight answers

How thick should my concrete slab be?

It depends entirely on the load — a garden shed pad and a slab carrying a tractor are different jobs. We confirm what the slab has to hold at the site visit and quote the thickness and reinforcing to match, rather than pouring one depth for everything.

Do you do the excavation as well as the concrete?

Yes. We run our own digger and tipper, so the digout, cart-away, hardfill and compaction are part of the same quote as the pour.

Can you pour a slab on a sloping or rural site?

Usually. Slope, access and ground conditions change how much cut and fill is involved, which is exactly what we assess on site before quoting.

Do I need a building consent for a slab?

That depends on what is going on top and its size — Gisborne District Council sets the thresholds. We can tell you when a job looks like it needs consent, but the consent itself is between you and the council.

How long before I can build on it?

Concrete keeps gaining strength after the pour, and weather changes the timing. We give you a specific date at handover rather than a general rule.

Service area

Serving Gisborne city and surrounding Tairāwhiti from 443 Awapuni Road.

Eastcrete Solutions Ltd · 443 Awapuni Road, Gisborne 4071 · 021 024 64667

Related services

Get a free
slab quote.

☎ Call now Get a Free Quote